|
HOME : TECHNOLOGY CENTER : INDUSTRY CONSULTANTS : CONSULTANTS LISTING
CONSULTANTS TO THE MAGNETICS INDUSTRY
In any industry there are a select group of individuals and companies which serve as non-resident experts. This listing is presented to facilitate contacts between consulting resources and companies. The listing is in alphabetical order by company (or consultant) name.
If you are a consultant and would like to be listed, please forward your information to techcenter@arnoldmagnetics.com, fax to (+1) 815-568-2247, or mail to Web Master, Arnold Magnetic Technologies, 770 Linden Avenue, Rochester, NY 14625 USA.
DIRECTORY LISTING
 
AKC Patents, 215 Grove Street, Newton, MA 02466 USA
|
|
Contact: Dr. Aliki K. Collins
Phone: (+1) 617-558-5389
Fax: (+1) 617-332-0371
E-mail:
|
SERVICES:
Patent Portfolio Development
Identify patentable inventions
Prepare summary of patentable inventions
Prioritize patentable inventions based on inputs from business and technical management teams
Provide patent strategy advice
Patent Preparation and Prosecution at the United States Patent and Trademark Office (USPTO)
Registered to prosecute patents at USPTO
Expertise
Magnetic Materials and Devices
Optical Materials and Devices
Material Processing and Equipment
Electrical, Mechanical, Medical, Financial, Business and Software Arts
Background
Dr. Collins holds a Ph.D. in Materials Science and Engineering from MIT and a M.S. in Physics (Diplom Physiker) from the Technical University of Berlin, Germany. She is registered to practice before the United States Patent and Trademark Office. She has successfully prosecuted a large number of patents in the areas mentioned above.
|
Allied Kiln Service, Inc., P.O. Box 415, N5550 Cheyenne Drive, Onalaska, WI 54650 USA
|
|
Contact: Timothy J. Tobin
Phone: (+1) 608-783-4455
Fax: (+1) 608-783-4420
E-mail:
Web site: www.alliedkilnservice.com
|
Services:
- Installations, combustion, refractory/fiber, electrical, instrumentation
- Profiling/balancing
- Custom design and fabrication of new kilns
|
Applied Magnet Technology, 68 Diana Road, Portage, IN 46368 USA
|
|
Contact: Yuri Rabinovich
Phone: (+1) 219-399-3538
Fax: (+1) 219-762-5446
E-mail
Specific Requests: amtdune@earthlink.net
General Information: info@appliedmagnettechnology.com
Web site: www.appliedmagnettechnology.com
|
About AMT
Services are coordinated among 18 professionals located at 8 R&D centers and 7 manufacturing locations. For more complete information, visit the AMT Web site.
Services:
- Pilot scale production of magnet materials
Manufacturing of experimental compositions
- Metrology and testing
Temperature dependence of magnetic properties
Corrosion resistance testing
Analysis of chemical and phase composition
High frequency testing of semi- and hard magnetic materials
- Design, computer simulation and prototyping
Design of manufacture devices based on permanent magnets for various applications
- Modernization of magnet measuring and testing equipment
- Consulting
Process Optimization for cost reduction and improved performance
Recommendations for selecting / upgrading equipment
Market analysis
Review of technical literature and standards for CIS countries
- Training
Technology commercialization Marketing Intellectual property rights
- Organizational service
Organize study tours, meetings, seminars and conferences
Travel support in Russia, Ukraine and other CIS countries
Assist with Customs clearance both to and from Russia
Translation: Russian-English and English-Russian
|
|
Advanced Magnetic Technologies & Consulting, Garibaldi 24, Moscow, 117393, Russia
|
Contact: Yuri I. Spichkin
Phone: (+7) 095 78 78 1 78
Fax: (+7) 095 78 78 1 78
E-mail: magnet@amtc.org
Web site: www.amtc.org
|
Advanced Magnetic Technologies & Consulting, Ltd. (AMT&C) carries out technological research and development in magnetism and its applications. We work in collaboration with Universities and National Laboratories of the USA, Europe, Russia and China as well as with several industrial companies.
Our efforts are directed to for-profit as well as non-profit organizations. AMT&C commercial activity has the objective of assisting you to meet business challenges and to utilize the capabilities of modern magnetic technologies. To strengthen your competitivness we offer R&D and a skillful staff to solve your material or technology related problems. Our consultants are recognized experts in the area of magnetism and are ready to provide a flexible consulting and expert witness service.
We are also ready to serve Foundations, Associations and Government organizations and offer a non-profit service on dissemination and provision of most kinds of scientific and technological information in Russia.
Areas of specialty include:
- Magnetic nanosized systems (surfaces, nanoparticles, and molecular clusters)
- Advanced polymers and ceramics (especially containing metallic and magnetic nanoparticles)
- Magnetic and optical memory materials
- Magnetic refrigeration
- Magnetic sensors (especially SQUID and non-contact based)
- Magnetic foam and its applications
- Ultrasensitive imaging by Scanning SQUID Microscope
In addition to consulting, AMTC offers for sale a wide range of permanent magnet products.
|
Advanced MotorTech, 9117 Park Blvd., Largo, FL 33777 USA
|
|
Contacts:
Keith W. Klontz, PhD, PE
Howard (Haodong) Li, PhD
Phone: (+1) 727-412-8200
Toll Free: 800-901-9932
Fax: (+1) 727-412-8203
E-mail: sales@advancedmotortech.com
Web site: www.advancedmotortech.com
|
Advanced MotorTech is a leading provider of Computer-Aided Engineering (CAE) solutions to electric motor design engineers, research and development labs, educators and students. These include:
- Sales and support of JMAG Studio 2D and 3D Finite Element Analysis (FEA) software by JRI Solutions Ltd. (Tokyo, Japan)
- Support in North America for SPEED Consortium members, as well as focused consulting and training throughout the electric machine industry
- Design and analysis of most motor types including Brushless DC, Induction, Universal and Brushed DC
Motor experience and expertise includes miniature sizes up to 1000's of hp, new product design to failure analysis of legacy products, theoretical concepts to practical design-for-manufacture, design for high efficiency or power density.
|
|
Avatar Engineering Corp., 301 Newbury Street, Suite #200, Danvers, MA 01923
|
Contact: Offline contact information
Online contact information
Phone: (+1) 978-590-7060
Web site: www.avatarengineer.com
|
Avatar Engineering Corporation
is an innovative solutions focused company that develops Custom Electronics as well as practical, high value software to benefit Corporate and Engineering operations and develops and manufactures specialized Power Test Equipment and Custom Transformers.
Avatar Engineering Corporation was incorporated in March of 1997 and is the combining of resources of both Global Power Corporation and Monad One Incorporated to create Standard products as an additional foundation to Custom and New product development which had become its mainstay over the past twenty years while serving all industries; Aerospace, Military, Industrial, and high volume Commercial. We're Re-Inventing analysis methods to provide easy to use, faster, and more accurate tools and new products with greater value over all competition.
AEC provides single phase line frequency transformer design for power applications
over 100VA and under 10KVA. Optimization techniques ensure designs that are:
- Lower cost in high volume
- Lower weight and smaller size
- Higher efficiency (less heat)
- Flexible design of geometry/shape
Design customization to your application, environment, and other constraints assures successful operation and improvements in performance versus conventional "catalog" transformers.
|
|
Walter T. Benecki, 2121 N. Ocean Blvd. #708W
Boca Raton, FL 33431 USA
|
Contact: Walter T. Benecki
Cell Phone: (+1) 847-624-1170
E-mail: waltbenecki@aol.com
Website: www.waltbenecki.com
|
Services:
Acquisitions
Benchmarking
Business Valuations
China-USA Relationships
Dispositions
|
Joint Ventures
New Product Planning
Sales & Marketing
Strategic Planning
Web Site Assessment
|
|
Experience:
Walt graduated from Penn State University in 1961-62 with B.S. and M.S. Degrees in Ceramic Engineering. He began his career with RCA as a Development Engineer and then returned to school to earn an M.B.A. from the University of Pittsburgh in 1965. For the next ten years, Walt was with the Carborundum Company in assignments including Sales Engineer, Market Research Manager and Manager, New Product Development. In 1974 he joined the General Electric Company as Manager, Strategic Planning and was later promoted to Marketing Manager (General Purpose Motors) and General Management (Engineering and Apparatus Services). In 1984, Walt joined the Copperweld Corporation as Group Vice President, Bimetallic Products.
In 1989, Walt was appointed President, Arnold Engineering, a $50 million company headquartered in Marengo, Illinois. By 2000, Arnold Engineering grew to become a highly profitable worldwide enterprise called Arnold with sales of $140 million. During that period, Arnold made numerous product line dispositions and strategic acquisitions. Arnold's product scope now covers a broad range of permanent magnet and soft magnetic materials, components and value-added assemblies. Arnold was one of the first companies in the Magnetics Industry to form Chinese strategic alliances and establish its own manufacturing operations in mainland China. Walt was active in the Magnetic Materials Producers Association (MMPA), acting as its President from 1994-1997.
|
|
Best Solution Consultancy Ltd
114 Cokeham Lane, Sompting, Lancing, West Sussex BN15 9SQ, UK
|
Contact: Tim Collyer
Phone and Fax: (+44) 1903 602 798
E-mail: info@best-solution.co.uk
Website: www.best-solution.co.uk
|
About Best Solution Consultancy:
Best Solution was set up in 1996 to provide industrial clients with a magnetic design and modeling service. Mainly using finite element methods, we provide support on a wide range of projects from motor and actuator design, to modeling forces in large superconducting magnet assemblies. Some of our customers require an occasional input during product development or problem solving tasks, while others who already have a good modeling capability find us useful for enhancing the capacity of their own teams.
|
Our capabilites include:
2d and 3d non-linear finite element
Static, time harmonic, velocity and transient analysis
Extreme accuracy requirements
|
Thermal, stress and coupled field capabilities
Creation of control system models
FEA applications advice and training
|
|
e/j Bloom Associates, Inc., 4340 Redwood Hwy., Office E356, San Rafael, CA 94903 USA
|
|
Contacts: Ed and Joy Bloom
Phone: Education Division (+1) 415-492-8443, Product Engineering Division (+1) 415-491-0601
Fax: Education Division (+1) 415-491-1239, Product Engineering Division (+1) 415-491-0645
E-mail:
Web site: www.ejbloom.com
|
Services: The Educational Division offers books, software and courses for magnetics design engineers. The Product Engineering Division offers R&D services for power magnetics (discrete, planar and integrated).
|
|
Bright Engineering, Inc., 2110 Polk Drive, Ames, IA 50010 USA
|
Contact: Charles B. Bright, P.E.
Phone: (+1) 515-663-9942
Fax: (+1) 515-233-8983
E-mail:
Web site: www.bright-engineering.com
|
When arranging for the services of Bright Engineering, Inc., you acquire skills gained by 19+ years of team-oriented experience in developing concepts, writing proposals, analysis, design, manufacturing, installation, system integration, troubleshooting and repair.
Areas of specialty include:
- Magnetostrictive Transducers: Engineering of transducers using rare earth-iron materials
- Analysis: Physics-based modeling, Linear and non-linear electro-mechanical systems
- Models used to: Arrange basic configuration, Match impedances, Optimize transients and delays, Predict energy flow, Minimize size and cost
- Design And Build: Supervision of robust, quality, cost-effective hardware development
- Test Planning and Supervision, considerations include: Product proof of performance requirements, Product configuration during tests, Fixturing, Data accuracy, Instrumentation, Safety, Data collection, documentation, and reporting
- Troubleshooting: Failure diagnosis, Lack of performance, Questionable, false, or misleading data
|
Carnegie-Mellon University, Materials, Science & Engineering Department, 243 Roberts Engineering Hall, Pittsburgh, PA 15213 USA
|
|
Contact: Prof. Michael E. McHenry
Phone: (+1) 412-268-2703
Fax: (+1) 412-268-3113
E-mail: mm7g@andrew.cmu.edu
Web site: http://neon.mems.cmu.edu/people/mchenry.htm
|
Services:
- Magnetic measurments by VSM and SQUID Magnetometry
- Structural analysis by X-ray diffraction and TEM
- Synthesis of materials by melt-processing, plasma systhesis and rapid solidification processes
|
|
CBC Motor Design Solutions, LLC, P.O. Box 6845, Ventura, CA 93006-6845 USA
|
Contact: Charles Caverno
Phone: (+1) 805-659-1968
Cell Phone: (+1) 805-452-4244
Fax: (+1) 805-659-1968
E-mail:
Web site: www.cbcmotordesign.com
|
CBC Motor Design Solutions designs electromechanical devices and fabricates prototypes. From plain paper designs to cost reducing existing, CBC Motor Design Solutions delivers a full range of motor design solutions for you.
Services include:
- Magnetic Design: Classical finite element analysis
- Mechanical Design: Including bearing and lubricant systems
- Drafting: AutoCad and Mechanical Desktop
- Sourcing of prototype parts
- Supervision and evaluation of testing
- Evaluate current motor designs and make recommendations for cost reductions and / or performance improvement
- Noise and vibration reduction
- Vendor procurement, costing, bill of materials
|
Cobalt Development Institute, 167 High Street, Guildford, Surrey, GU1 3AJ, U.K.
|
|
Contacts: Michael Hawkins
Isabelle Porri, Administration Manager
Phone: (+44) 1483 578877
Fax: (+44) 1483 573873
E-mail:
Web site: www.thecdi.com
|
Services: The Cobalt Development Institute is a trade organization with the objective of encouraging the use of coablt and its compounds. In addition to hosting a major conference each spring and publishing an industry newsletter ("Cobalt News"), the Institute is involved in the following services:
- Health, Safety, and Environmental issues
- Statistics regarding the availability and use of cobalt
- Technical and General Information on cobalt and its alloys
|
Data Decisions, 86 N. Muirfield Drive, Valparaiso, IN 46385 USA
|
|
Contact: Robert Wolf
Phone: (+1) 219-462-7282
Fax: (+1) 253-276-5036
E-mail: rwolf5@verizon.net
|
Robert Wolf, President of Data Decisions, has over twenty-five years experience in permanent magnet sales, marketing and product management. He has a degree in Physics and teaching experience at the university level.
Services include:
- Market Studies
- Competitive Intelligence
- United States Import and Export Data
|
Ferrite Summit, 60 Avenue de St Pardon, 33450 Izon, France
|
|
Contact: Joλl Moine
Phone: (+33) (0) 557 747 825
Mobile Phone: (+33) (0) 673 823 740
E-mail: joel.moine@ferrite-summit.fr
-or- joel.moine33@wanadoo.fr
|
Based on 30+ years of experience with a strong background in soft ferrites (MnZn, NiZn), services include consultation on:
- Manufacturing performance optimization
- Cost reduction
- Yield (output) improvement
|
Background and Experience:
Multilingual: French, English, German
Training and experience in measurement techniques, magnetic materials, technology of ceramics, powder properties and measurement, statistics and quality control, FMEA, and process control
Previous experience as an Industrial Engineer, Process Engineer and Quality Manager
Member: ITG, Consulting and Training, Paris
|
Ferrite Technology Worldwide, 4625 Fifth Ave. #305, Pittsburgh, PA 15213 USA
|
|
Contact: Dr. Alex Goldman
Phone: (+1) 412-621-4068
Fax: (+1) 412-621-4068 -- Call first
E-mail: ferritetec@aol.com
|
Services include consultation on:
- Magnetic materials research, manufacturing and sales
- Soft ferrite manufacturing, application and design
- Magnetic material selection for specific applications
|
|
Field Simulation Consultants, P.O. Box 13595, Albuquerque, NM 87192 USA
Field Simulation Consultants can solve your design and research problems with advanced 3D finite-element software and over forty years' experience in electromagnetic theory and experiments.
|
Contact: Stanley Humphries, PhD
Phone: (+1) 505-220-3975
Fax: (+1) 617-752-9077
E-mail: humphries@fieldsim3d.com
|
Areas of specialization include:
- Applied electrostatics and high-voltage engineering
- Design of electron and ion guns and beam transport systems
- Simulations of RF ablation and other electro-surgical applications
- Field calculations for permanent-magnet assemblies, magnetic shielding and electromagnets
- Simulations of X-ray sources and imaging systems
- Structured FORTRAN programs with modern graphical interfaces.
|
Prof. George C. Hadjipanayis, 230 Sharp Laboratory, University of Delaware, Neward, DE 19716 USA
|
|
Phone: (+1) 302-831-2736
Direct: (+1) 302-831-6289
Fax: (+1) 302-831-1637
E-mail: hadji@udel.edu
Web site: http://www.physics.udel.edu/contact/people/hadji.php
|
Services:
- Materials Preparation: Melt Spinning (Ribbons), Mechanical Alloying (Powders), Sintering (Anisotropic Magnets), Sputtering/Evaporation (Thin Films)
- Materials Characterization: Magnetic Measurements in fields up to 9 Tesla, Hysteresis Loops (4.2 - 1300 °K), Anisotropy Measurements, Time Effects
- Structure/Microstructure: Analytical Electron Microscopy with EDAX detector for Composition Analysis, Lorrentz Microscopy
|
High Tech Materials, 1049 Ponderosa Circle, Longmont, CO 80501 USA
|
|
Contact:Rich Vito
Phone: (+1) 303-772-0678
Fax & Voice: (+1) 303-290-7037
E-mail: richvito@RareEarthsMarketPlace.com
Web site: www.RareEarthsMarketPlace.com
|
Services:
- Publishing: Elements: Rare earths, Specialty Metals & Applied Technology
- Rare Earths & Specialty Materials Pricing and Sourcing
- Market Research: Market Activity, Data Searches
- Buyer/Seller Identification and Facilitation
|
David M. Hopstock, 2126 South Rosewood Lane, Roseville, MN 55113 USA
|
|
Phone: (+1) 651-636-2967
Fax: (+1) 651-636-1234
E-mail: hopstock@ieee.org
|
Consulting services in the following areas:
- Thermoplastic and elastomeric binder systems for bonded magnet materials
- Production of barium and strontium ferrites for both bonded magnets and magnetic recording applications
- Magnetic separation technology with an emphasis on mineral processing technology
- Design of permanent arrays
- Production and application of magnetic pavement marking
- Chemical processing of magnetic materials
|
HTA Corp., 3730-30 Higashikata, Fukaya 366-0041 JAPAN
|
|
Contact:Hideki Harada
Phone: (+81) 48-572-3101
Fax: (+81) 48-574-7639
E-mail: KHB16457@nifty.ne.jp
|
Services: Research and development support for electro-magnetic materials, cemented carbides and thin film materials and applications. HTA Corp. has expertise in many products including:
- Hard and soft ferrites
- Rare earth magnetic materials and products
- Bonded magnets
- Coating technology
- Tooling
|
|
Intertech Corporation, 19 Northbrook Drive, Portland, ME 04105 USA
|
|
Contact:Dr. Hugh Olmstead
Phone: (+1) 207-781-9606
Fax: (+1) 207-781-2150
E-mail: olmstead@intertechusa.com
Web site: www.intertechusa.com
|
Intertech is an internationally recognized source of market and technical information for the magnet and magnetic materials industries. Our custom single-client consulting, multi-client studies, educational workshops and industry conferences provide the information you need to remain competitive. Intertech offers:
- Material, technology and industry assessments
- Strategic planning, product and market strategies
- Acquisitions research and prospecting
- Product and market research
|
Dr. Nickolay Klevets, 49 Balaklavskaya Str., Fl. 7, Simferopol, Crimea, Ukraine
|
|
Contact: Dr. Nickolay Klevets
Phone: (+380) (0) 652 49-37-84
E-mail: pmsolution@mail.ru
|
Twenty years experience in the design of magnetic systems can be put to use for you in the following areas:
- Synthesis of magnetic systems for optimal flux
- Synthesis of magnetic systems to achieve peak force
- Synthesis of permanent and electromagnetic systems creating a required field distribution
The manufacture of prototypes and magnetic systems can be arranged.
|
LaunchPoint Technologies, LLC, 5735 Hollister Ave., Suite B, Goleta, CA 93117, USA
|
 |
Contact: Mr. Dave Paden
Phone: (+1) 805-683-9659 x210
Fax: (+1) 805-683-9671
E-mail: dpaden@launchpnt.com
Web site: www.launchpnt.com
|
|
LaunchPoint Techologies, with its staff
of experienced, well educated professionals, researches, develops and
prototypes advanced electromechanical systems.
Expertise:
Electromechanical Systems
Biomedical Devices
Computational Fluid Dynamics (CFD)
Biofluid & Blood Flow Modeling
Biomaterial Design
Control Engineering (multivariable and nonlinear)
Magnetic Actuators (Magnetic Bearings and Motors)
Real-time Embedded Software
Trajectory Planning
Full Prototyping Capability
Primary Products
Implantable Artificial Hearts
Magnetic Bearing Systems
Nanometer-resolution Proximity Sensor
Experimental Products for Dynamics and Control Research and Education.
|
Magna-Tech P/M Labs, 4 Greenbriar Lane, Cinnaminson, NJ 08077 USA
|
|
Contact: Kenneth H. Moyer, President
Phone: (+1) 856-829-7765
Fax: (+1) 856-786-4003
|
Services include:
Consulting, DC magnetic testing, chemical analyses, educational seminars, metallography, mechanical testing, powder property determination, original research and development, failure analysis of ferrous and non-ferrous metals.
|
MagnetinMotion, 2017 Bivins Street, Durham, NC 27707 USA
|
|
Contact: Dr. Yuriy Zhilichev
Phone: (+1) 919-599-2633
E-mail: yuriy@magnetinmotion.com
Website: www.magnetinmotion.com
|
Services include:
Design & Optimization Algorithms, Design & Optimization of Electric Machines & Drives, Electromagnetic Field Analysis, Electric & Magnetic Circuit Design, System Modeling.
Areas of Expertise
Electromagnetic Fields Electrical and Magnetic Circuits Electric Motors and Drives
Transformers, Chokes and Coils Magnetic Components Electromechanical Systems
Permanent Magnets Superconductors Sensors Magnetic Bearings
|
Magnetics Technology, Inc., 3012 Northwood Drive, Ames, IA 50011 USA
|
|
Contact: Prof. David Jiles
Phone: (+1) 515-233-6514
Fax: (+1) 515-233-4589
E-mail: jilesd@cardiff.ac.uk
Cardiff Website: www.cf.ac.uk/wolfson
Iowa Web site: www.mse.iastate.edu/who-we-are/people/faculty/david-jiles.html
|
Services performed by the company staff of 14 professionals include:
- Consultation in magnetics
- R&D contracts in: Material Properties and Evaluation; Magnetic Measurements and Modeling
- Supplier of Magnetic Modeling Software
|
MTM Consulting, 290 Primitive Acres Lane, Boones Mill, VA 24065 USA
|
|
Contact: Burley C. Semones
Phone: (+1) 540-483-5644
Fax: (+1) 540-483-5644
E-mail: bsemonesconsult2@aol.com
Mr. Semones formed MTM Consulting after more than 30 years of service in the servo motor and electronics industry.
|
Available Services include:
|
- Technical Due Diligence
- Product Verification
- Agency Compliance
- Competitive Evaluations
- Patent Evaluation
- Market Analyses
- Workshop Planning
- Business Development
|
- Motor Technology Development
- Motor and Generator Prototypes
- Servo Motor System Data Analyses
- Application of Permanent Magnet Materials
- Strategic Technical Planning
- Product Concept Planning
- Technical Staff Assistance
|
|
National Institute of Science and Technology, Magnetic Materials Group, Bldg. 223, Rm. B 152, Gaithersburg, MD 20899 USA
|
Contact: Robert D. Shull, Ph.D.
Phone: (+1) 301-975-6035
Fax: (+1) 301-975-4553
E-mail: shull@nist.gov
Web site: www.metallurgy.nist.gov/magnet/
|
Services: Please visit the Magnetic Materials Group Web site for more detail.
|
- Magnetic Standards
- Magnetic Measurement Science Assistance
- NanoTechnology
- Magnetic Materials Science
- Giant Magnetoresistive Materials
|
- Magnetocaloric Materials
- Magnetic Domain Imaging
- Ferromagnetic Resonance
- Mφssbauer Effect
- Micromagnetics
|
NKE Powder Technology GmbH, Werver Mark 2, 59174 Kamen GERMANY
|
|
Contact: Dr. Hartmut Nagel
Phone: (+49) (0) 2307-944-573
Fax: (+49) (0) 2307-944-575
E-mail: info@nke-powtech.de
Web site: www.nke-powtech.de
|
Services include: Engineering and consulting, technical and economic evaluations, project planning, installation management, equipment and turn-key projects, and after sales service. NKE is engaged directly in developing new and more efficient production technologies, using the latest scientific sources, analyses and process studies in cooperation with European Universities. Two areas of significant experience and expertise are:
- Powder compaction systems, including: tooling and tool adaptors, filling shoes, aligning coils, DC power supplies, press control systems, cleaning units
- Equipment for hydrogen decrepitation (of rare earth alloys) including: vacuum vessel, magnetically coupled vacuum pumping unit, magnetically coupled rotation drive, gas supply system, safety interlock, resistance heating system, recirculation gas cooling system, PLC process controller
|
|
Oak Ridge National Laboratory, Metals and Ceramics Division, Bldg 4500S-MS6115, P.O. Box 2008, Oak Ridge, TN 37381-6115 USA
|
Contact: Dr. Joe Horton
Phone: (+1) 865-574-5575
Fax: (+1) 865-574-7659
E-mail: hortonja@ornl.gov
|
Services:
Measurement of mechanical properties of magnetic materials. For reference please see "Fracture Toughness of Commercial Magnets: by J.A. Horton, J.L. Wright and J.W. Herchenroeder, IEEE Transactions on Magnetics, 32, #5, (1996) 4374-6.
|
Pietsch Engineering Solutions, Inc., 7741 N. 100 W., West LaFayette, IN 47906 USA
|
|
Contact: Herbert Pietsch
Phone: (+1) 765-497-0077
Fax: (+1) 765-497-0077 (call first)
E-mail: pietschengrg@netscape.net
|
Services:
- Design and development of electromechanical and magnetic devices such as PM torque couplers, hysteresis motors, solenoids, relays, magnetic valves, transformers and similar devices
- Prototyping and test services
- Magnetic FEA analysis of new or existing products
- Customized short courses on topics in magnetics
- Design and development of related power electronic circuits such as power supplies and machine controls
- Prototype circuit design, pcb layout, assembly and test services
|
Prof. David J. Sellmyer, University of Nebraska, Nebraska Center for Materials and Nanoscience, 112 Brace Laboratory, P.O. Box 880113, Lincoln, NE 68588-0113 USA
|
|
Contacts: Prof. David Sellmyer, Dr. MingLang Yan
Phone: (+1) 402-472-7886
Fax: (+1) 402-472-2879
E-mail: dsellmyer@unl.edu -or- myan@unlserve.unl.edu
Web sites: CMRA Web Site -or-
Prof. Sellmyer
|
Services:
- Magnetic Property Measurements of permanent and soft materials over wide field and temperature ranges: from 4.2 to 1000°K and 0 to 90 kOe. Properites include coercivity, saturation magnetization, anisotropy, and susceptibility.
- Structural Measurements using high resolution transmission electron and scanning probe microscopies and x-ray diffraction.
|
|
SMPS Technology, 6233 Callaway Place, Alta Loma, CA 91737-6904 USA
|
Contact: Jerrold Foutz
Phone: (+1) 909-989-0487
Fax: (Please call or use E-mail)
E-mail: foutz@smpstech.com
Web site: www.smpstech.com
|
Services: SMPS, founded in 1981, provides content to power supply circuit designers via the internet. The information is provided in a unique problem solving format that discusses the problem, relevance, solvability, and solutions and gives pointers to a few of the best papers or resources for solving the problem.
|
Spontaneous Materials, 12348 Melrose Circle, Fishers, IN 46038 USA
|
Contact: Stanley R. Trout, Ph.D., P.E.
Phone: (+1) 317-596-0858
Fax: (+1) 317-577-4106
E-mail: strout@ieee.org
Web site: www.spontaneousmaterials.com
|
|
Services:
With over twenty-five years experience in the permanent magnet and rare earth industries, in a variety of technical and commercial roles, Dr. Trout offers problem solving expertise in the following areas:
Magnetic Materials
Materials selection
Design assistance and review
Magnetic measurements
Technical Training
Customized training
Seminars
On-site and internet support
|
Technical Writing
Data sheets, Applications Bulletins
Presentations
Web site content
Proofreading and editing
Rare Earths
Market assessments
Customer development
Specification resolution
|
|
|
Thompson Consulting, Inc., 9 Jacob Gates Road, Harvard, MA 01451 USA
|
Contact: Marc T. Thompson, Ph.D.
Phone: (+1) 978-456-7722
Fax: (+1) 240-414-2655
E-mail: marctt@aol.com
Web site: http://members.aol.com/marctt/index.htm
|
Services: The company provides multidisciplinary consulting in a variety of electrical and mechanical areas, including:
- Analog, power electronics, electromechanical, thermal and magnetic design
- Maglev, electro-optic and electromechanical system design
|
Dr. Thompson is an engineering design consultant and Adjunct Associate Professor of Electrical Engineering at Worcester Polytechnic Institute with over 15 years experience as a design engineer, researcher, professor and consultant. He also has available an extensive network of other consultants and technical experts located in the Boston, Massachusetts area.
|
University of Sheffield, Department of Electronic and Electrical Engineering, Mappin Street, Sheffield S1 3JD, U.K.
|
|
Contact: Prof. David Howe
Phone: (+44) 114-222 5195
Fax: (+44) 114-222 5196
E-mail: s.j.gawthorpe@sheffield.ac.uk
Web site: www.shef.ac.uk/uni/academic/D-H/eee/
|
Services:
- Computer-aided design software for PM brushless drives
- Design of impulse magnetising fixtures
- Prototyping and testing of PM machines and actuators
- System design and simulation
- Drive-trains for electric vehicles
- Magnetic bearing systems
- High speed machines
|
The VSM Group, Arkival Technology, 427-3 Amherst Street, Suite 360, Nashua, NH 03063 USA
|
|
Contact: Ron Weiss
Phone: (+1) 603-881-3322
Fax: (+1) 603-883-1021
E-mail: nhinc@aol.com
Web site: www.arkival.com/vsm.html
|
Services:
The VSM Group, an independent measurement lab, tests magnetic materials including magnetic tapes and discs, platings, thin films, ferrites, powders, permanent magnets, etc. Simple magnetic test data, QA data, magnetic analysis, custom measurements and full analytic reports are available. Fast turnaround guaranteed. Internet access available.
Parameters tested: Bs, Br, Hc, Hr, Sq, SFDr, SFD, Hmax, Is, Ir, SQ, S*, Hc, dH, SFD
Equipment- VIBRATING SAMPLE MAGNETOMETER (VSM) ADE/DMS Model 880 includes a computer controlled magnetic measurement system to accurately characterize magnetic materials including single phase, bi-phasic, anisotropic, diamagnetic, paramagnetic, ferromagnetic and many other material types. Software control provides automatic sequences of different types of magnetic measurements including field-ranging capability. Testing can be customized for specific applications based on sample size, test fields, measurement planes and temperatures.
|
|
Wolfson Centre for Magnetics Technology, Industrial Magnetics Group, Electrical Division, School of Engineering, Cardiff University, P.O. Box 925, Cardiff CF24 0YF, U.K.
|
Description:The Wolfson Centre for Magnetics Technology has built its reputation in magnetics research and development for industry over the past three decades and it is internationally recognized as a major authority in magnetics technology. The group has the facilities and expertise for long term research or short term consultancy projects, through its Industrial Magnetics Group, in a wide range of areas including those listed below.
|
Contact: Prof. Tony Moses
Wolfson Centre for Magnetics Technology
Cardiff University, P.O. Box 925, Cardiff, CF24 0YF, UK
Phone: (+44) (0) 29 2087 5936 -or- (+44) (0) 29 2087 6829, Fax: (+44) (0) 29 2087 6729
E-mail: wolfson_magnetics@cf.ac.uk
Web site: www.cardiff.ac.uk/engin/research/advancedmaterials/wolfson/index.html
|
Services:
- Magnetic Measurements
- Design and development of electromagnetic devices
- Development of new magnetic materials
- Development of novel magnetic sensors
|
- Finite element modeling of electromagnetic devices
- Design of instrumentation for magnetic measurements
- Training in the areas listed above
|
Dr. Robert Woodward, Centre for Strategic Nano-fabrication, School of Physics, The University of Western Australia, Nedlands, M013, 35 Sterling Hwy, Crawley WA 6009, Australia
|
|
Phone: (+61) 8 6488 2751
Fax: (+61) 8 6488 1014
E-mail: woodward@physics.uwa.edu.au
Web site: http://www.magnetics.uwa.edu.au/biomagnetics
|
Services: Magnetic materials characterization via VSM, SQUID and Magneto-optical magnetometry, and Magnetic Force and Kerr Microscopy.
|
MAIN FIELDS OF EXPERIENCE
|
Ceramics and Powder Metallurgy
Coatings and Surface Technology
Plastic Molding and Extrusion
Coatings
Printing Technology
|
Packaging Materials
EMC and ESD Shielding
Chemical Process Simulation
Quality Management
|
SERVICES
|
Documentation according to the requirements of existing QM Systems
Technology transfer
Coaching and seminars
Project work for:
Product and process development
Problem resolution in production, product quality and yield
New applications and markets
Product verification and validation
Production equipment: planning, installation and scale-up
Analytical and test methods
Investigations
Public funding: applications, documentation and evaluation
|
Yeadon Engineering Services, P.C. and Yeadon Energy Systems, Inc., 514 West Maple Street, Iron River, MI 49935 USA
|
|
Contact:William H. Yeadon, P.E.
Phone: (+1) 906-265-7937
Fax: (+1) 906-265-0007
E-mail: yes@yeadoninc.com
Web site: www.yeadoninc.com
|
Services: Electric motor design and prototype fabrication, electric motor testing, motor design software. All design work and prototyping can be provided including: electrical and mechanical design, drafting, costing, materials procurement and vendor identification, prototyping and performance testing.
|
The presence of any company or individual on the consultants list does not constitute or imply endorsement, recommendation, or favoring by Arnold Magnetic Technologies or its parent or affiliated companies. Please see our Disclaimer.
TOP | BACK | HOME | HELP | MAP | CONTACT
Copyright © Arnold Magnetic Technologies Corporation. All Rights Reserved.
Please send all web related questions/comments to the Webmaster.
|
