Precision Rolled Copper & Copper Alloys

Strength and versatility under harsh conditions

Key Applications & Uses
  • Batteries
  • Miniaturization of electronic devices
  • Cable and component shielding
  • Printed circuit boards
  • Antimicrobial surfaces

Thin-rolled copper and copper alloys from Arnold Precision Thin Metals (PTM) serve a broad range of needs. This versatile material is used in a variety of electrical products, heat exchangers, solar collectors, piping and other applications that require strength and corrosion resistance. Copper is often the best solution for applications that require excellent conductivity, strength and formability. Cooper and its alloys are generally non-magnetic. Copper alloys are also ideally suited to minimize bacterial levels on touch surfaces. To meet these needs, PTM offers its customers copper strip materials in a wide variety of thicknesses and alloy compositions.

Available in all grades and tempers

Arnold PTM produces thin and ultra-thin strip in a wide range of tempers. The most common grades requested include C101, C110, and BeCu 172, but we can source and roll all copper and copper alloy grades. Contact us to discuss your requirements.

Common Name UNS Number Composition (nominal) Wt% Typical Mechanical Properties (Annealed)
Tensile Yield
OFHC Copper C10100 99.99Cu, 0.00005% O max --- ---
Copper C11000 99 Cu min 34ksi (235 MPa) 11ksi (76 MPa)
Beryllium Copper C17200 1.90 Be --- ---
Phosphor Bronze A C51000 5 Sn, .2P 50 (345) 22 (150)
Copper Nickel 30% C71500 30 Ni 66 (450)* ---
*H02 half-hard temper

Copper and its alloys are available in various tempers. Give us a call for more information.


Dimensional

Each is available in a variety of thicknesses and dimensions:

Thickness Maximum Width
0.025"- 0.003" (0.635 - 0.08mm) 17.5" (444.5mm) as rolled edge
17.0" (431.8mm) with a slit edge
0.00039" - 0.00008" (0.0099 - 0.002mm)  4.25" (107.95mm) as rolled edge
4.0" (101.6mm) with a slit edge