Blog | Page 5 of 7 | Arnold Magnetic Technologies

GOES & NGOES – Controlling Internal Structure and Why It Matters

Posted: November 6, 2019

GOES and NGOES Si-Fe differ in internal structure, which determines their characteristic magnetic properties. The iron single crystal has a preferred direction more conducive to magnetization. As shown in Fig. […]

Questions on Your New Design?

Posted: April 2, 2019

Arnold’s Team is Here for You Arnold is the industry leader not only in permanent magnets but also electromagnetics, thin metals, and a variety of engineered assemblies. Our Technology Center […]

New R&D Location Open in Wisconsin

Posted: February 27, 2019

Rapid Prototyping Now Offered Arnold Magnetic Technologies, global manufacturer of rare earth magnets, magnetic assemblies, and precision thin metals, has opened a research and development facility inside the MGE Innovation Center […]

Improved Testing of Molypermalloy and other High Frequency Materials

Posted: October 11, 2018

At Precision Thin Metals, a Division of Arnold Magnetic Technologies. At Arnold, we like demanding applications and we’re always up for a good challenge! Fortunately, our customers have obliged and […]

Arnold to Attend CWIEME Berlin

Posted: May 30, 2018

Representatives from Arnold will be exhibiting at the Coil & Winding show June 19-20, 2018 in Messe, Berlin. Materials produced by Arnold can be used in a variety of applications, […]

SpaceTech Expo is around the corner – See you there!

Posted: April 24, 2018

May 22-24, 2018, Arnold is exhibiting at the SpaceTech Expo in Pasadena, CA in booth 8018 Arnold provides materials and products used in aviation, satellites, and a wide range of critical applications […]

BioMed in Boston – Arnold exhibiting and taking appointments at booth 765

Posted: April 13, 2018

April 18th & 19th, 2018, Arnold is exhibiting at the BioMed Device show in Boston, MA. Thin metals and custom engineered magnetic assemblies are critical to many new medical device […]

Aerospace & Defense Supplier Summit in Seattle, WA

Posted: March 26, 2018

This week, Arnold engineers and representatives are in Seattle, Washington for the Aerospace & Defense Supplier Summit hosted by Advanced Business Events. Director of Engineering, Aaron Williams, Precision Thin Metals’ […]

A Practical Approach to Specifying Magnetic Assemblies

Posted: February 1, 2018

Understanding Permanent Magnet Operating Characteristics in your Motor Design. Arnold Magnetic Technologies’ Director of Engineering, Aaron Williams, will be presenting at the 2018 Motor and Drive Conference in Orlando February […]

Improve performance in high-speed motors

Posted: September 5, 2017

E-turbo performance – With an improved understanding of new materials and their application, substantial performance gains can be achieved in high-speed motors.
The demand for continuous improvement drives engineers to push the capabilities of existing designs while adding innovations to augment and/or replace existing technology. New materials applied to these systems and novel applications of technologies can accomplish the goal at minimal risk.

CONTACT A SPECIALIST